phone: 0439 643 384

Woodlander™ Trailer

$2,575.00 - $3,424.00
AUD
Includes GST, Freight Extra
No reviews yet Write a Review

The Woodland Mills Woodlander™ trailer package can be combined with either of our popular HM126 & HM130 sawmills, making the sawmill a truly versatile and portable sawmill. The Woodlander™ trailer package is a well built and economical solution for sawyers looking for the right combination of mobility and setup efficiency.

The trailer was designed to fit all 2017 and newer HM126 & HM130 sawmills. Constructed with laser cut bent plates and tubular cross supports, the chassis becomes quite rigid as it unites with the sawmill track system to complete a box style structured chassis.

Note: Sawmill track assembly components (highlighted in yellow) are not included with this trailer. Instead, you will need to attach these parts from your existing 2017 or newer HM126 or HM130 sawmill to the trailer frame.


Can this trailer be registered and licensed for highway use?

While the Woodlander™ trailer is sold as an off-road trailer, some customers have been successful in licensing it for highway use as a home built or "ubilt" trailer. Every province, state and country has different requirements and it is recommended to check with your regions particular requirements firstly.

No VIN number provided.

 

Maximum Trailer Length

The Woodlander trailer is available in two cut lengths: Standard -10’ 5″ (3.1m) and XL - 16’ 11” (5.1m). Additional extensions cannot be added to the XL trailers.

Trailer Axle:
Independent Torsion Axle Design
Trailer Wheels:
5 Bolt on 4.5" (114mm) & 5.30-12 DOT Approved Tires
Trailer Lights:
LED light kit (stop, turn, tail, side markers and licence plate light)
Trailer Levelling Jacks:
Woodlander™: 4 levelling jacks; Woodland XL: 6 levelling jacks
Trailer Ball Coupler:
2" (50mm)
Finish:
Powder Coat Paint / Galvanized Steel
Fenders:
Removable
Safety:
Locking pins and safety straps to secure sawhead while travelling
Shipping Weight:
640 lbs (290 kg)

Woodlander™ Trailer


A 12’10″ (3.9m) length provides the ability to cut log lengths up to 10’ 5″ (3.1m) - (XL trailer package available – 16’ 11” (5.1m) log lengths). It features a galvanized steel frame, torsion axle suspension system and Department of Transportation (DOT) approved tires. LED light kit (stop, turn, tail, side markers and licence plate light), safety chains and a 2” (50mm) ball receiver also come standard with the trailer. 4 leveling jacks enable quick and stable sawmill setup on uneven ground. A sawmill head locking kit (locks the head to the trailer for transport) is included in the trailer package.

LED Light Kit


Included with the trailer package is an LED light kit featuring stop, turn, tail, side markers and licence plate lights which are powered through the standard wire harness adapter from your vehicle.

Levelling Jacks


The trailer package comes standard with four (4) 3,000 lb (1,360kgs) sidewind levelling jacks to quickly and easily level the sawmill front to back and side to side. The swivel jacks can be rotated from the horizontal travel position to the vertical position for quick mill set up. They provide a full 10” (25cm) of height adjustability. The foot measures 3.75” x 7.5” (95mm x 190mm).

Wheels & Torsion Axles


The trailer chassis rests on a pair of rubber torsional axles with a combined load capacity of 1,870 lbs (850kgs). The hubs are a 5 bolt on 4.5” (114mm) and the tires are DOT approved 5.30-12. The wheel fenders are made of steel and can easily be removed without the use of tools so they are out of the way when operating the sawmill or loading logs.

Tongue


Tongue Weight The head of the sawmill is secured to the trailer at a location which provides proper tongue weight for safe towing. The trailer manual provided specifies this location.

Transport Lock Down Kit


The trailer includes our sawmill head lock down kit so that you can safely secure the sawmill head to the trailer during transportation. Four (4) 3/8” (9.5mm) pins go through the sides of the trailer and the brackets attached to the head. A heavy-duty ratchet strap is also included as a secondary measure for securing the sawmill head to the trailer.

Warranty


The sawmill trailer is covered with a 2 year warranty against manufacturer’s defect and excludes wearing parts (bearings, axles and tires).

SHIPPING

Shipping Weight: 640 lbs (290 kg)

MANUALS & DRAWINGS